Watch the Steps
Confidence starts with care. Our handcrafted areola prostheses bring beauty, comfort, and confidence to your daily routine. This guide shows how to use them — from prep to application and gentle removal.
Watch the video to follow each step clearly and confidently.
Step-by-Step Guide
Every part of the process was created with your well-being in mind — simple, safe, and paced to match your needs. Follow the steps below.
Step1
Clean the Skin
Gently wash the breast area using neutral soap or alcohol.
Be sure to dry the skin completely before continuing — this helps ensure better fixation and a stronger hold.
Step2
Apply FixCare Adhesive
Use the FixCare adhesive, included in your application kit.
Apply a thin, even layer to the back of the prosthesis, focusing on the edges for a smooth, natural blend. For best results, add a touch to the center of the breast.
Step3
Position and Press
Place the prosthesis in the desired position and press it gently. Then apply firm pressure around the entire circumference, especially the edges, for 15 to 30 seconds.
This helps prevent water, sweat, or dirt from entering under the prosthesis.
Step4
Make Sure It’s Stuck
After pressing, wait for 2 minutes. Then, gently check if the prosthesis is secure by lifting the nipple area.
Make sure the edges are sealed with no gaps. Avoid pulling forcefully — it’s just a light test.
Step5
Remove Gently
To remove, lift one corner of the prosthesis carefully and pull slowly.
Be gentle to avoid damaging or tearing the prosthesis.
Step6
Clean with Clean Care
Use Clean Care, the remover included in your kit, to clean the prosthesis and your skin.
Do not use alcohol, soap, or any other product, as they won’t remove the adhesive and may damage the material over time.
Step7
Repeat or Store Your Prosthesis
If you’re not reapplying immediately, place the prosthesis inside the aluminum tin included in your kit.
This will help protect its texture, shape, and softness, ensuring it stays in perfect condition for longer.
Still Have Questions?
We’re here to support you every step of the way. If anything feels unclear, don’t hesitate to reach out.
RmonyCare Collections
Begin Your Journey with RmonyCare
Explore our handcrafted collections, designed to restore confidence, beauty, and comfort through every stage of healing.
FAQs
Common questions about daily use and care.
How long does the prosthesis stay bonded?
The FixCare adhesive can keep the prosthesis securely bonded for2 to 5 days, depending on factors like body temperature, sweat, and daily activities.
For best results, make sure to apply the adhesive in a thin and full layer, especially around the edges, and press firmly during application to create a complete seal.
Are the prostheses waterproof?
Yes, silicone prostheses are water-resistant, allowing you to shower or swim while wearing them. However, prolonged exposure may affect longevity.
Are the prostheses easy to remove?
Yes, the prostheses are easy to remove when done gently.
Start by lifting one corner with your fingertips and slowly peel it off with care. Avoid pulling too fast or with too much force to protect the material and maintain its durability.
Is the adhesive safe for my skin?
Yes. Our medical-grade adhesive is hypoallergenic and dermatologically tested. It’s designed specifically for sensitive or healing skin.
How do I store the prosthesis?
After cleaning, always store your prosthesis in the aluminum storage tin provided. This helps maintain its softness, shape, and longevity.